Jinghang V series laser tube are filled with imported gas, the purity is higher. This ensures more stable power and faster cutting speed. The laser tube adopt new technology when manufacture process, which improve the beam size and beam quality. increased the power efficiently.
The laser focus of V serious CO2 laser tube is smaller, the energy is more concentrated, the penetrating power is stronger, the penetration is high, and the cutting speed is faster. Quick response speed, etc.
V-Series: Main Parameters
|
Type |
Length (mm) |
Dia (mm) |
Rated Power (W) |
Max Power (W) |
Warranty (Months) |
|
V-1280 |
1250 |
80 |
80 |
105 |
12 |
|
V-1480 |
1450 |
80 |
100 |
125 |
12 |
|
V-1680 |
1650 |
80 |
130 |
155 |
12 |
|
V-1880 |
1850 |
80 |
150 |
190 |
12 |
Note:
1 We can customize products according to your requirements
2. The tube diameter tolerance is ±2mm.
3. The working current should be controlled 28mA~30 mA
Product Application:
Jinghang laser tubes have widely used in applications:
1 Application Machines: CO2 laser machine , Laser engraving machine, laser cutting machine, laser marking machine, mini laser engraver, desktop laser cutter.
2 Application materials: cutting acrylic,glass, cloth, leather, cloth, stone, wood, color board etc
3 Application Industry:Advertising decoration, gifts, paper products, bamboo products, lighting, packaging, plate-making, display cutting etc
Features and Advantages:
1 In order to ensure the consistency of Laser Tube quality, from the laser tube blank firing, resonant cavity catalytic coating, grinding patch and accurate charging process, the whole process is implemented with strict quality control.
2 With the application of a serious of special patents, the discharge tube coated with catalytic technology, the life has increased; matched with the electrode treated by special process, the output power is more stable.
3 Application of our own patented technology to modify the beam size and quality , the beam problem has been solved effectively, the spot is more rounded and better.
4 Our products have been passed 18 process rigorous testing procedures prior to shipment. The smaller beam spot and stable output power ensures Jinghang CO2 laser tube’s fast cutting speed. When cutting white fabric, it can not get yellow.
5 Superior output window Lens, excellent beam mode.
6 We have a professional technical team, provide 7*24hours 1 TO 1 after-Service,
Installation instructions
1. Installation Requirement
Make sure to follow the operation instruction of JH Laser Tube as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
2. Operation conditions
Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.
The operating environment: temperature 2-40℃; humidity 10-60%.
The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter must be connected to the negative electrode of laser tube.
When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened rapidly.
To protect dust from going into the insulation sheath, please wrap it with plastic film.
3. Working Performance
Cutting function.
Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
4. Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing its laser spot.
5. Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
6. Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
Tubes operated in wrong way are not guaranteed by Manufacturer.
FAQ:
LASER TUBE
1: Are you a trade company or a manufacturer?
A: We are a CE approved manufacturer specialized in CO2 laser Tube, laser lens, reflective mirrors and power supply. OEM & ODM service are available.
2: What is your delivery date?
A: The delivery date is about 7 days after receipt of payment.
3: What's the warranty of co2 laser tube?
A: The warranty is 6~18 months for different series
4: What's the lifetime of your co2 laser tube?
A: The lifetime is 10,000 hours for laser tube 90~150w
5: What will you do before shipment?
A3-1: QC will inspect each laser tube again before shipment
A3-2: The cables will be soldered well on anode & cathode terminal for laser tube
6: Do you accept customization of laser tube?
A: Yes, customized design is accepted
7: How to choose correct laser tube for your old machine?
A: If you do not know the exact power of your laser tube, the diameter and length of old laser tube should be measured, and then tell it our sales
Tags
