Jinghang laser tube are superior in quality because the products have been passed 18 process rigorous testing procedures prior to shipment. With special patents and catalytic technology, our laser tube have longer life, stable output power, good beam mode and fast cutting speed. When cutting white fabric, it can not get yellow.
H Series CO2 Laser Tube is the traditional series of Shijiazhuang jinghang laser technology co., ltd. The gas of H-series tubes are filled with gas produced by domestic manufacturers. H series are obtained well reputation from the customers for its high cost performance. After the technological upgrading and innovation , the warranty of H series is extended.
Model |
H600
|
H700
|
H800
|
H1050
|
H1260
|
H1280
|
H1480
|
H1660
|
H1680
|
H1880
|
H2080
|
Length |
600mm |
700mm |
800mm |
1000mm |
1250mm |
1250mm |
1450mm |
1650mm |
1650mm |
1850mm |
2050mm |
Diameter |
50±1mm |
50±1mm |
50±1mm |
60±1mm |
60±1mm |
80±1mm |
80±1mm |
60±1mm |
80±1mm |
80±1mm |
80±1mm |
Wavelength |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
10.6um |
Catalyst |
No |
No |
No |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Output Power
|
30W |
40W |
45W |
50W |
60W |
80W |
100W |
80W |
130W |
150W |
180W |
Max Output Power |
40W |
50W |
50W |
80W |
90W |
100W |
120W |
130W |
150W |
180W |
200W |
Triggering Voltage |
18-23KV |
26-28KV |
26-29KV |
||||||||
Working Voltage |
18-21KV
|
20-23KV
|
20-25KV |
||||||||
Triggering Current |
2-3mA |
||||||||||
Max Working Current |
15mA |
15mA |
15mA |
20mA |
20mA |
28mA |
28mA |
30mA |
30mA |
30mA |
30mA |
Type Of Cooling |
Water-cooling 15-25℃
|
||||||||||
Instability(%) |
≤1% |
||||||||||
Spot diameter |
3±1mm |
3±1mm |
3±1mm |
4±1mm |
4±1mm |
4±1mm |
5±1mm |
7±1mm |
7±1mm |
7±1mm |
7±1mm |
Warranty |
6Months
|
10 months
|
Note: We can customize products according to your requirements
Jinghang laser tubes have widely applications:
1 Application Machines: CO2 Laser engraving machine, laser cutting, laser marking,
2 Application materials: cutting acrylic,glass, cloth, leather, cloth, stone, wood, color board etc
3 Application Industry:Advertising decoration, gifts, paper products, bamboo products, lighting, packaging, plate-making, display cutting etc
1. Long Life and Stable Power
Jinghang CO2 laser tube have a serious of special patents, the discharge tube coated with catalytic technology, the life has increased; matched with the electrode treated by special process, ensure the discharge more stable. Such as the Jinghang CO2 laser tube 150 w ,it’s max output power can reach about 180 w. Other company’s CO2 laser tube merely can beyond us.
2. Fast Cutting Speed
Jinghang laser tubes have improved the quality all the time, Jinghang CO2 laser tube’s cutting speed is apparently faster than others in the same power
3. Good Beam Mode
Jinghang Laser beam mode is good, using own patented technology to modify the beam size and quality effectively that solves the beam distortion, increase the effective power.
4. Light Weight
To compared Jinghang CO2 laser tube with the same other general Co2 laser tube, Our Jinghang CO2 laser tube’s weight is lighter than others’. which will help enterprise to have a more diversify application on CO2 laser tube
5. Long Warranty
We provide 7*24hours 1 TO 1 after-Service, we committed that our J H LASER tubes 150w have 6 months warranty to you.
6. Competitive Price
Jinghang CO2 laser tube have providing competitive price for all customers, we think our products will make you satisfaction.
1. Installation Requirement
Make sure to follow the operation instruction of JH Laser Tube as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
2. Operation conditions
Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.
The operating environment: temperature 2-40℃; humidity 10-60%.
The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter must be connected to the negative electrode of laser tube.
When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened rapidly.
To protect dust from going into the insulation sheath, please wrap it with plastic film.
3. Working Performance
Cutting function.
Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
4. Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing its laser spot.
5. Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
6. Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
Tubes operated in wrong way are not guaranteed by Manufacturer.
1: Are you a trade company or a manufacturer?
A: We are a CE approved manufacturer specialized in CO2 laser Tube, laser lens, reflective mirrors and power supply. OEM & ODM service are available.
2: What is your delivery date?
A: The delivery date is about 7 days after receipt of payment.
3: What's the warranty of co2 laser tube?
A: The warranty is 6~18 months for different series
4: What's the lifetime of your co2 laser tube?
A: The lifetime is 10,000 hours for laser tube 90~150w
5: What will you do before shipment?
A3-1: QC will inspect each laser tube again before shipment
A3-2: The cables will be soldered well on anode & cathode terminal for laser tube
6: Do you accept customization of laser tube?
A: Yes, customized design is accepted
7: How to choose correct laser tube for your old machine?
A: If you do not know the exact power of your laser tube, the diameter and length of old laser tube should be measured, and then tell it our sales
Package
Tags