Home - Products - CO2 Laser Power Supply - 80W CO2 Laser Power Supply
  • 80W CO2 Laser Power Supply

  • 80W CO2 Laser Power Supply

  • 80W CO2 Laser Power Supply

  • 80W CO2 Laser Power Supply

  • 80W CO2 Laser Power Supply

  • 80W CO2 Laser Power Supply

80W CO2 Laser Power Supply

80 watts Laser Power Source adopt high frequency design advantages, pay more attention to every component quality for major parts, and keep high performance and duration. 80W laser power supplies were used to 70W – 80W CO2 laser tube for kinds of industrial laser system.
Share:
Product Description

80 watts Laser Power Source adopt high frequency design advantages, pay more attention to every component quality for major parts, and keep high performance and duration. 80W laser power supplies were used to 70W – 80W CO2 laser tube for kinds of industrial laser system. Laser power supply produced by LinYi ZhaoRi Electronics is well known with ultra long lifetime, stability, good as first choice in 80W CO2 laser cutter and laser engraver.

 

Specification

H80W POWER SUPPLY

Input

Input voltage

AC220v or AC110V(Order should be specified)

Ac frequency

47---440Hz

Cold surge current

≤60A(AC220v)

≤30A(AC110V)

Leakage current

≤0.7mA(AC220V)

≤0.4mA(AC110V)

output

Maximum output voltage

DC 35KV

Maximum output current

DC 35 mA

Efficiency

≥90%(Full load)

Mean time to failure

≥10000 hours

Response speed

≤1mS(The switching signal is given to the time that the output current rise to 90% of the set current)

Control interface

TTL  Level switch control,the active level can be high or low

Pressure

AC1500V 10mA 60s;

Protect

Open for short time(Require the power supply housing to be well grounded,while avoiding arcing between the positive pole and the casing)。

Using environment

Working temperature(-10~40)℃ ,Relative humidity:≤90%

Cooling form

Forced air cooling

Outline size

L×W×H=285×190×105(mm)

 

Model

Dimension (mm)

Used to laser tube

Warranty

ZR-40W

165*144*80

30 – 40W co2 glass laser tube

1 years

 

ZR-50W

165*144*100

40 – 50W co2 laser glass tube

ZR-60W

208*173*105

50 -70W co2 glass laser tube

ZR-80W

285×190×105

60 -90W co2 glass laser tube

ZR-120WA

285×190×105

60 -130W co2 glass laser tube

ZR-130W

350×225×105

100 -150W co2 glass laser tube

ZR-150WB

325*140*100

100~180W co2 glass laser tube

ZR-150WD

350×235×105

100~180W co2 glass laser tube

ZR-150WE

350×235×105

200~600W co2 glass laser tube

DY-10

197*157*80

RECI 80w co2 glass laser tube

DY-13

270*160*80

RECI 100w co2 glass laser tube

DY-20

315*200*80

RECI 130w and 150w co2 glass laser tube

 

Features and advantages

1) Good compatibility: It can be applicable to 100W laser tube of a number of manufacturers.

2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect.

3) Dramatically lengthen the service life of laser.

4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.

5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.

6) The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.

7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.

8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.

9) Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc.

Contact Us
Request a Quote
captcha
Chatting