Dec. 29, 2021
Industrial CO2 laser light guide arm can be divided into industrial CO2 laser light guide arm below 600w and industrial CO2 laser light guide arm below 6000w according to whether the total Si reflection mirror is cooled by water or not. Industrial CO2 laser light guide arm suitable for below 600w. Because CO2 laser has low power and energy, laser lens can be used without water cooling. Industrial CO2 laser light guide arm suitable for below 6000W. Because of the high power and energy of CO2 laser, the laser lens needs water cooling to be suitable. Let's talk about the configuration selection of two industrial CO2 laser light guide arms.
There are 4/5/6/7 joints of the industrial CO2 laser light guide arm suitable for below 600w, and customers can choose according to the working scene of the light guide arm. Si reflecting lens is 25.4mm in diameter and 3mm in thickness, ZnSe focusing lens is 25.4mm in diameter and 3mm in thickness, and there are many focal lengths to choose from. The aperture is 15mm, and the arm length is 2m at the most.
There are 4/5/6/7 joints of industrial CO2 laser light guide arm suitable for below 6000w, and customers choose according to the working scene of light guide arm. Si reflector mirror is Dia50.8mm and thickness 10mm , ZnSe focusing lens is Dia50.8mm and thickness 10mm. There are many focal lengths to choose from, and there is a water cooling system. The aperture is 35mm, and the arm length is 4m at most. Customers are requested to customize their industrial CO2 laser light guide arm according to their own needs.
