Views:15 Author:Site Editor Publish Time: 2019-11-27 Origin:Site
The replacement of the Co2 laser tube is a part that needs attention, which determines the length of the life of the CO2 laser tube, the power of the CO2 laser tube, the quality of the co2 laser tube spot, and the division of responsibility for the co2 laser tube warranty period. Let's talk about the replacement method of the co2 laser tube;
1. The Co2 laser tube wall is marked with a fulcrum position. When installing, be sure to pay attention to the support position of the laser engraving machine and the fulcrum position of the co2 laser tube.
2, Co2 laser tube length determines the difficulty of co2 laser tube replacement, the height of the light exit of the co2 laser tube is required to be 2mm higher than the high pressure end of the co2 laser tube, so that the bubbles in the co2 laser tube can be safely discharged. If the co2 laser tube is horizontal, the co2 laser tube will accumulate in the water outlet as the water temperature rises in use until the co2 laser tube glass bursts. This is our common co2 laser tube.
3, the current co2 laser tube manufacturers are connected to the wire of the co2 laser tube, relatively simple, just need to insulate the laser power line to prevent fire.
4. Finally, adjust the optical path of the co2 laser tube. The position of the three silicon reflective lenses and the laser head focusing lens is just fine.