+8613831176073    :  emily@jhlasertube.com 
Home » News » Blog » Length 700mm Dia 50mm 40W CO2 laser tube for laser machine measurement method

Length 700mm Dia 50mm 40W CO2 laser tube for laser machine measurement method

Views:11     Author:Site Editor     Publish Time: 2018-12-19      Origin:Site

      For the general laser engraving machine, the quality and performance of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine definitely have the effect of processing, so the operator should always check during the use process to clearly understand the life of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine laser engraving machine. As the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine is used for a long time, the energy emitted by the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine will gradually decrease. Let's briefly introduce the test method and method of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine voltage.

      How to measure the voltage of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine in the laser engraving machine, if the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine has energy reduction or no energy, we must first check the input voltage of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine, and then consider other possibilities. The voltage of the laser engraving machine power supply board to the Length 700mm Dia50mm 40W CO2 laser tube for laser machine under normal conditions is DC 48V. Even if the external voltage is normal, if the power board is faulty, the rated voltage of the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine may not be 48V, which will cause the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine energy attenuation. Or work is not working properly.

       Here's how to detect the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine voltage:

1 Shut down, unplug the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine power plug;

2 Start up, transfer the files engraved when the fault occurs, and start engraving (cutting) according to the normal working procedure;

3 Observe the plug. There are several thin wires and red and black thick wires. Measure the voltage between any red and black wires to see if it is 48V. Note that the multimeter should be adjusted to the DC voltage first gear.

4 If it is not 48V, there may be a problem with the power board; if it is 48V, it may be other reasons for the Length 700mm Dia 50mm 40W CO2 laser tube for laser machine itself.


PRODUCT INQUIRE

DO BEST LASER TUBE MANUFACUTER

Home

Copyright © 2018 Shijiazhuang Jinghang Laser Technology Co., Ltd.     
 Support By Rongchuangmedia