+8613831176073    :  emily@jhlasertube.com 
Home » News » Blog » How laser engraving machine extends 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube life

How laser engraving machine extends 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube life

Views:60     Author:Site Editor     Publish Time: 2018-12-19      Origin:Site

       The laser engraving machine is a 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube. The 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube should be properly maintained and maintained during use. How to maintain the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube to extend the life of the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube? Let me introduce it to you.

1. When laser engraving machine uses 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube, it should be noted that the cooling water is best to use pure tap water and distilled water. The best is pure water to keep the water temperature below 25 °C.2. The temperature in summer is high. It is necessary to pay attention to changing the cooling water. It is found that the temperature is too high, and it needs to stop and rest, and then suffer from cooling water. When the temperature is cold in winter, after the machine is finished, it is necessary to pay attention to the cooling water inside the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube. Finish, to avoid the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube being frozen and cracked.3. If the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube refrigeration system uses pump circulation refrigeration, it is necessary to pay attention to the circulating cooling water, it must ensure that the flow rate of cooling water per minute is between 2 liters and 4 liters. If the flow is not in place, the water temperature is not well cooled, and the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube is easy. The film is deflected, causing the power of the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube to drop.4. The 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube should be protected from contamination at the output port. It is necessary to pay attention to the smoke generated when the optical path is adjusted or machined, which will cause the surface of the output port to be blurred, so that the power of the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube will drop, and the machine must open the exhaust device. Make sure the machine works without smoke.5. After the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube is applied for a long time, there will be scale in the tube circulation system. Need to pay attention to regular use 20% diluted hydrochloric acid to clean the cooling tube, clear scale, to avoid blockage, colleagues recommend water circulation system, the better the water quality feels better, maintain good maintenance habits, 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube use time will be longer.6. Be careful when installing the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube for the first time. Do not remove the thin wire on the electrode. Because the wire and the life of the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube are closely related, it is to prevent the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube from arcing during operation and prevent burning. The output window surface exists and must be noted.7. The 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube is a glass product. When installing and debugging, it should be handled gently. The heads at both ends of the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube should be protected from external impact and dirt pollution. Regarding the maintenance and maintenance of the 40W 50W 60W 80W 100W 130W 150W Glass co2 laser tube, the above attention has been paid, because the details are more and more, I hope everyone pays more attention to it. The maintenance of the 40W 50W 60W 80W 100W 130W 150W Glass co2 


PRODUCT INQUIRE

DO BEST LASER TUBE MANUFACUTER

Home

Copyright © 2018 Shijiazhuang Jinghang Laser Technology Co., Ltd.     
 Support By Rongchuangmedia