+8613831176073    :  emily@jhlasertube.com 
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
Home » News » Blog » Device for China jinghang 30w 40w 50w co2 glass sealed laser tube recuperation

Device for China jinghang 30w 40w 50w co2 glass sealed laser tube recuperation

Views:1     Author:Site Editor     Publish Time: 2018-12-29      Origin:Site

Device for China jinghang 30w 40w 50w co2 glass sealed laser tube recuperation

 

Note on China jinghang 30w 40w 50w co2 glass sealed laser tube  Utilization

1. Please switch on the hot fire first when using it, accept the principle of " going low beyond crossing" and mediate the position of the fire pipe. The hot fire is full of hot fire pipes, and the steam bubbles cannot be stored in the pipes before turning on the power supply. Request: Hot fire accepts hard fire ( distilled fire or pure fire ) and should always pay attention to the fire temperature of hot fire. The fire temperature should be controlled in the range of 25 - 30 , not too high or too low, especially in hot days. Once the fire temperature is invented too high, it should be changed in real time or stopped for a period of time: the hot fire in cold areas does not freeze, especially after the laser stops, the hot fire should not be stored in the China  jinghang 30w 40w 50w co2 glass sealed laser tube , so as not to cause cracking when the hot fire freezes. ( Pay special attention to: users who exchange electricity must pick up the fire box when it is hot );

2. The two opening and closing surfaces of the China  jinghang 30w 40w 50w co2 glass sealed laser tube  should be 1 / 4 less than the total surface of the China  jinghang 30w 40w 50w co2 glass sealed laser tube , and the flow rate of the envelope heat but fire is 2L-4L/ min. Otherwise, if the result is not good enough, the takeoff mode will be provoked and the power will drop due to several facula changes. The tempering heart of hot fire must be covered by fire in the fire box, or there is no sign of modesty when the China  jinghang 30w 40w 50w co2 glass sealed laser tube  is closed and turned on.

3. Pay attention to the output window center of the shelter laser, prevent smoke from sputtering to the surface of the output window center during the incident ( including the debugging light path ), avoid purification of the surface of the output window center, and power will drop. At that time, skim cotton or silk cloth can be dipped in alcohol without fire to wipe the surface of the output window center quietly.

4. In the process of debugging, adjust the laser support surface or twist the laser round position through the process to achieve the best output result, and then firmly fix the laser.

5. Please pay attention to: stop the dust from gathering around the pressing electrode, make the connection dull, and keep the pressing end as close to the metal as possible to prevent the pressing electrode from being discharged by water.

6. In the process of laser utilization, it is impossible to prevent the formation of heat but fire obstruction and the heat collection result will be better. Once invented, 20 % hydrochloric acid can be used to muddy wash the heat pipe to eliminate fire scale.

7. The laser is a glass finished product and fragile. When the device is in use, some stress is prevented.

8. Use China  jinghang 30w 40w 50w co2 glass sealed laser tube  to save laser energy. The best current of China  jinghang 30w 40w 50w co2 glass sealed laser tube  is 16mA.

The China  jinghang 30w 40w 50w co2 glass sealed laser tube  often sees the trouble removed

1, carved without depth:

1. Once the light is received, it is not deep: check whether the opening and closing surfaces of the China  jinghang 30w 40w 50w co2 glass sealed laser tube  can be opened, whether the light intensity can be set too small, whether the light path can be shifted, whether the focal length can be accurate, whether the ytterbium sheet can have scratches and clean objects on its outer surface, and whether the flow pressure of heat but fire can be normal. The above achievements will check whether the lenses in the light-emitting center of the China  jinghang 30w 40w 50w co2 glass sealed laser tube  can have scratches and clean objects, if so, then it will be the China  jinghang 30w 40w 50w co2 glass sealed laser tube 's own quantity achievements.

2. It took a while for the China  jinghang 30w 40w 50w co2 glass sealed laser tube  to receive light, but it was not deep: whether the opening and closing surfaces of the China  jinghang 30w 40w 50w co2 glass sealed laser tube  can be opened, whether the temperature of the fire can exceed 30 degrees, whether the lens can have a fever while things are going on, whether the flow pressure of the heat but the fire can be normal, whether the heat but the fire can be muddy and clean, and whether the above is normal and then the China  jinghang 30w 40w 50w co2 glass sealed laser tube  can be inspected.

2. Press down to get water and discharge: Check whether there is any clean material and moisture around the press down head, and whether it is too far away from the mechanical metal department; The other is whether the laser power supply can press down the adjacent installation and lose it from the receiving seat, and whether the inside of the adjacent installation can be broken or destroyed. If the above is normal, then it is the China  jinghang 30w 40w 50w co2 glass sealed laser tube 's own quantity achievement.

3, China  jinghang 30w 40w 50w co2 glass sealed laser tube  broken, crack, hot head shattered:

1. Whether the fire temperature can be controlled is in the range of 25 - 30 . In cold regions, the heat is not frozen, especially after the laser stops, the heat is not stored in the China  jinghang 30w 40w 50w co2 glass sealed laser tube .

2. Whether the light collection can be under the control of fire shelter; ( Test whether the light will be received or not with the fire on and off. )

3. Whether there is any sign that the fire pipes on dry roads will be torn down.

4. Can there be bubbles in the China  jinghang 30w 40w 50w co2 glass sealed laser tube ?

5. Fire pressure fire flow can be general; Whether the goal of the fire flow target can be lowered beyond the crossing.

6.1 - 5 general words then are the China  jinghang 30w 40w 50w co2 glass sealed laser tube 's own measurement results.


PRODUCT INQUIRE

DO BEST LASER TUBE MANUFACUTER

Home

Copyright © 2018 Shijiazhuang Jinghang Laser Technology Co., Ltd.     
 Support By Rongchuangmedia