+8613831176073    :  emily@jhlasertube.com 
Home » News » Blog » Common knowledge commonly used in co2 laser tube

Common knowledge commonly used in co2 laser tube

Views:4     Author:Site Editor     Publish Time: 2020-05-09      Origin:Site

Common knowledge commonly used in co2 laser tube

I have summarized the common common knowledge commonly used in co2 laser tubes. The following will be helpful to everyone, please read

Talk about the disadvantages of co2 laser tube inflation

The Co2 laser tube is filled with carbon dioxide gas. During the use of the co2 laser tube, the gas will be consumed slowly until the consumption is completed, and the life of the co2 laser tube ends. In order to reduce costs, some customers and co2 laser tube manufacturers united to recharge the co2 laser tube at the end of their life, and some bad businesses even used the re-inflated co2 laser tube as a new co2 laser tube to sell on the market. This is a deception. The quality of the second-inflated co2 laser tube is unstable, which seriously damages the rights and interests of customers. We recommend that customers do not buy co2 laser tubes that are re-inflated, but this is small and cheap. When you buy, please carefully look at the co2 laser tube trademark and buy branded co2 laser tubes. This behavior of recharging co2 laser tubes is It is caused by a small co2 laser tube manufacturer. If the laser tube does not do well, it is difficult to survive in the laser tube market by earning these small amounts of money.

Co2 laser tube is divided into 30w, 40w, 50w, 60w, 70w, 80w, 90w, 100w, 120w, 130w, 150w, 180w, 200w co2 laser tube. Co2 laser tube is coated with a kind of red catalyst, commonly known as red laser tube, 30w 40w 50w co2 laser tube due to power There is no need to plate a catalyst. The 60w 70w 80w 90w 100w 120w 130w 150w 180w 200w co2 laser tubes are all coated with catalyst. Today we will use the 80w 100w co2 laser tube as an example to talk about the function of the catalyst. There are two main functions of the catalyst: increasing the power of the laser tube and extending the life of the laser tube

1. Let me talk about the function of increasing the power of the co2 laser tube

The catalyst is red, is a kind of nano-gold, and the ductility is very good. This kind of nano-gold acts through the gas of the co2 laser tube and can increase the power by 30%. If the 80w laser tube is not coated with the catalyst, the maximum power is 110w, and after the catalyst is coated, the maximum power is 150w. . This is very intuitive and can be measured by a power meter.

2. Let me talk about extending the life of the laser tube

This nano-gold catalyst can reduce the carbon dioxide in the gas of the laser tube. During the operation of the laser tube, the carbon dioxide is decomposed into carbon monoxide and oxygen. The power and life of the laser tube will slowly decay. Into carbon dioxide, which can maintain the carbon dioxide content of the laser tube, thereby extending the life of the laser tube.

The role of Jing Hang co2 laser tube catalyst should be to increase the power of co2 laser tube and extend the life of co2 laser tube.

The type of Jing Hangco2 laser tube is divided into 30w, 40w, 50w, 60w, 80w, 100w, 130w, 150w, 180w, 200w, co2 laser tube according to the power. Because of considering the parameters of various co2 laser tubes, not all co2 laser tubes of co2 laser tubes have catalysts, and the catalysts are mainly plated to co2 laser tubes over 60w. Co2 laser tube coated with catalyst can increase the power of the laser tube by 30% and extend the life of the laser tube by 50%

According to the power of glass co2 laser tube, there are mainly 30w 40w 50w 60w 70w 80w 90w 100w 120w 130w 150w 180w 200w co2 laser tube. Each glass co2 laser tube power has its own fluctuation range, but there are several factors that affect the power of the glass co2 laser tube.

1. The influence of the water temperature of the glass co2 laser tube on the power of the laser tube.

The water temperature of the glass co2 laser tube should be around 25 degrees. If the water temperature is too high, it will affect the cooling effect of the glass co2 laser tube, reduce the power of the glass co2 laser tube, and affect the cutting and engraving speed.

2. If the model of the laser power supply does not match the power of the glass co2 laser tube, the power of the glass co2 laser tube will also be affected

The power of the glass co2 laser tube should match the model of the laser power supply, 30w 40w 50w 60w 70w 80w 90w 100w 120w 130w 150w 180w 200w co2 laser tube corresponds to the corresponding model of laser power supply

3. The optical path adjustment effect of the laser engraving machine will also affect the power of the glass co2 laser tube

Although the power of the laser tube is normal, the adjustment of the optical path is not good, which seriously affects the working effect of the laser tube

Artificial intelligence is currently a hot topic. In the era of 5G, can artificial intelligence be applied to the laser tube industry? This is something I have been thinking about. Not long ago, I received a telemarketer saying, do the air conditioners and washing machines at home make chips? The mobile phone can be controlled, and the air conditioner and washing machine appliances can be turned on before arriving at home, so I think, can the company's machinery and equipment be equipped with chips? Can it also be controlled with a mobile phone? Due to professional restrictions, I don't quite understand. However, I am very familiar with the production of laser tubes. The unit used in our laser industry is μ, which is very different from the unit wire in the machinery industry. How can the precision of the machine meet the precision of the laser tube? I think that unless the development of robots can be the same as the real flesh and blood ourselves, can science develop like this? If the application of artificial intelligence in laser tubes can be realized, it will definitely help to improve the quality and output of laser tubes.

What are the costs of Co2 laser tube?

Co2 laser tube is a very complicated instrument, a precious precision instrument, and the core component of laser engraving machine. The cost of Co2 laser tube is mainly composed of the following parts: 1. Co2 laser tube blank 2. Laser lens 3. Electrode 4. Water cooling jacket 5. Mixed gas 6. Labor cost 7. Depreciation of plant and equipment

There are many manufacturers of Co2 laser tubes, and there are many differences in the above factors. The cost of each cost factor is very different. As for the co2 laser tube blank, there are differences between German imported discharge tubes and domestic discharge tubes. The mixed gas also has the United States. The difference between German imported gas and domestic mixed gas, the cost difference is huge, not to mention the laser lens. For customers, do not blindly pursue too low prices, and cheaper co2 laser tubes, laser tube manufacturers also have to make money, and some manufacturers have a crooked idea if they can't make money through normal channels. Please customers. Pay attention to this.

When using co2 laser tube, in order to extend the life of the laser tube, it is best to use pure water for cooling. The high voltage end of the laser tube is extremely high, and the purified water contains no impurities, and no current will be generated with the high voltage end of the laser tube. If the laser tube is cooled with tap water, scale will be generated after a long time, which sometimes affects the use effect of the laser tube. When there is dirt on the water path of the laser tube, it is best to clean it with hydrofluoric acid. Add appropriate amount of hydrofluoric acid to the water to let the water flow through, and the dirt of the laser tube will be cleaned. Of course, if the water is changed regularly, it will not produce too much dirt, which is very helpful for cleaning the laser tube in the future.




Copyright © 2018 Shijiazhuang Jinghang Laser Technology Co., Ltd.     
 Support By Rongchuangmedia