+8613831176073    :  emily@jhlasertube.com 
Home » News » Blog » 80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube equipment maintenance

80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube equipment maintenance

Views:0     Author:Site Editor     Publish Time: 2018-12-23      Origin:Site

      Doing a good job in the maintenance of 80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube equipment can not only effectively sustain the life of 80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube equipment, reduce the probability of equipment problems, save costs, but also improve product quality and achieve efficient consumption.

In the garment industry, carving machines, cutting machines, etc. are increasingly being paid attention to how to effectively use laser equipment. Here are some simple introductions, and I hope to assist you. Linear guide After  80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube for the laser equipment is used for a period of time, it will sculpt and cut the smoke that is casually attacked. The dust has a corrosive effect on the guide rails, so it is necessary to stop the maintenance of the guide rails on schedule. Mirror, collection mirror clean. 80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube for the laser cutting machine or the carving machine is used for a period of time, the smoke dust will stick to the surface of the lens, which can affect the depth and precision of the carving and cutting. It is recommended to clean the three mirrors and a collection mirror with absolute alcohol for about one week. oil All the  80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube for laser equipment uses a lot of bearings, in order to ensure superior cutting, the results of the carving, part of the bearing demand to refuel on schedule. It is possible to use a clean soft cloth to wipe off the floating soil on the bearing, use a needle tube to suck the oil into the needle tube, and then slowly inject the oil into the bearing with a pillow, and rotate the bearing at the time of injection. Timing belt tension adjustment

There are several timing belts in the transmission system of 80W 90w 100W 120w 130W 150W 180w CO2 re ci laser tube for the laser engraving machine and the cutting machine. If the timing belt is too loose, the embroidered font will be presented with a ghost image. Over-tightening the belt will wear out easily.

 


PRODUCT INQUIRE

DO BEST LASER TUBE MANUFACUTER

Home

Copyright © 2018 Shijiazhuang Jinghang Laser Technology Co., Ltd.     
 Support By Rongchuangmedia