+8613831176073    :  emily@jhlasertube.com 
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
Home » Products » Laser Tube » 700mm 40w Laser Tube
Share to:

700mm 40w Laser Tube

  • JH
  • China
  • T/T
  • FOB
  • 30 Days
  • JH700
  • Customized
  • Standard Component
  • Laser Power Supply
  • 700mm 50mm
  • 4000
  • Ocean,Land,Air
  • 4000

Application of Co2 Laser Tube:Application: Industrial engraving, cutting and marking etc;

Applicable Material: leather, cloth, acrylic, PMMA, wood, color board, MDF, etc;

Applicable Industry: advertising decoration, gifts, paper products, bamboo products, lighting, packaging, plate-making, famous brand models, display cutting, etc.


JH700 Main parameters

Model

JH700

Length

700mm

Pipe Diameter

50±1mm

Wavelength

10.6um

Catalyst coated

No

Output Power Stable Value

35W

Max Output Power

42W

Triggering Voltage

18-23KV

Working Voltage

18-21KV

Triggering Current

4-5mA

Max Working Current

10mA

Type Of Cooling

Water-cooling 15-25℃

Spot diameter

3±1mm

Packing size

900mmx80mmx80mm


H-SeriesMain Parameters 

Type

Length

(mm)

Dia

(mm)

Rated Power

(W)

Max Power

(W)

Warranty

(Months)

H-600

600

50

30

40

6

H-700

700

50

40

50

6

H-800

800

50

40

50

6

H-1000

1000

50

50

80

6

H-1260

1250

60

60

90

6

H-1280

1250

80

80

100

10

H-1480

1450

80

100

120

10

H-1680

1650

80

130

150

10

H-1660

1650

60

80

130

10

H-1880

1850

80

150

180

10

 

V-SeriesMain Parameters 

Type

Length

(mm)

Dia

(mm)

Rated Power

(W)

Max Power

(W)

Warranty

(Months)

V-1280

1250

80

80

105

12

V-1480

1450

80

100

125

12

V-1680

1650

80

130

155

12

V-1880

1850

80

150

180

12

 

 

K-SeriesMain Parameters 

Type

Length

(mm)

Dia

(mm)

Rated Power

(W)

Max Power

(W)

Warranty

(Months)

K-1280

1250

80

80

110

18

K-1480

1450

80

100

130

18

K-1680

1650

80

130

160

18

K-1880

1850

80

150

190

18

  

D-SeriesMain Parameters co2 laser marking machine

Type

Length

(mm)

Dia

(mm)

Rated Power

(W)

Max Power

(W)

Warranty

(Months)

D-1280

1250

80

80

100

12

D-1480

1450

80

100

120

12

 


1. Installation Requirement

Make sure to follow the operation instruction of JH Laser Tube as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.

2. Operation conditions

Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.

The operating environment: temperature 2-40℃; humidity 10-60%.

The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter must be connected to the negative electrode of laser tube.

When it is working under over-high current for long term, the negative pole will appear brown yellow, and the life span will be shortened rapidly.

To protect dust from going into the insulation sheath, please wrap it with plastic film.

3. Working Performance

Cutting function.

Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.

4. Key Notes

Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:

1) When the mirror is polluted, do not turn on the laser.

2) Blow the mirror surface sideways with an air blower.

3) Spray the pure alcohol on the mirror surface with sprayer.

4) Turn on the laser after the alcohol gets fully volatilized.

5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.

Attention: it is forbidden to clean the mirror with acetone.

The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.

Put the acryl 300mm far away from output mirror, when testing its laser spot.

5. Safety

The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.

6. Storage and Transportation Requirement

Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.

Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.

Tubes operated in wrong way are not guaranteed by Manufacturer.


  If you have any question, please feel free to contact us! 

Send Your Message To This Supplier

Product Search
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Relate Articles

content is empty!

DO BEST LASER TUBE MANUFACUTER

Home

Copyright © 2018 Shijiazhuang Jinghang Laser Technology Co., Ltd.     
 Support By Rongchuangmedia